SCPI Command
SENSe<ch>:PLS2:PGEN<pg>:DELay <numeric>
SENSe<ch>:PLS2:PGEN<pg>:DELay?
Description
Sets the pulse delay of the pulse generator PG4...PG6 relative to the pulse trigger. Note: S5243 model only. |
|---|
command/query |
Target
Channel <Ch> = {[1]|2| ... 16},
Generator <pg> = {4|5|6}
Parameter
<numeric> pulse delay value.
Query Response
<numeric>
Unit
sec (second)
Resolution
20 ns
Preset Value
0
Related Commands
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse Generator Outputs > PG n Delay
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)
Rev.: 24.1