SCPI Command
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:DELay<n> <numeric>
SENSe<ch>:PLS2:ADVanced:PGEN<pg>:DELay<n>?
Sets the delay of pulse <n> (n from 1 to 3) for the pulse generator PG1...PG6. For more details, see the figure Pulse generator timing diagram. Note: The command is used in advanced mode, it is not used in basic pulse modes. Application requires knowledge of the internal structure of the analyzer. Note: S5243 model only. |
---|
command/query |
Channel <Ch> = {[1]|2| ... 16},
Generator <pg> = {1|2|3|4|5|6|7},
Pulse number <n> = {1|2|3}
<numeric> the value of the pulse delay.
sec (second)
<numeric>
0
Resolution
20 ns
Stimulus > Pulse Meas > Advanced Settings... -> Pulse Generators -> Delay {1, 2, 3}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)