Network Analyzers using RVNA and RNVNA software

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Programming > Command Reference > TRIGger

TRIG

Scroll Contact Us Home Prev Top Next More

SCPI Command

TRIGger[:SEQuence][:IMMediate]

Description

Generates a trigger signal and initiates a sweep under the following conditions: 1. Trigger source is set to the BUS (set by the command TRIG:SOUR BUS), otherwise an error occurs, and the command is ignored. 2. Analyzer must be in the trigger waiting state, otherwise (the analyzer is in the measurement state or in the hold state) an error occurs, and the command is ignored. The command is completed immediately after the generation of the trigger signal (does not wait the end of a sweep).
no query

Generates a trigger signal and initiates a sweep under the following conditions:

1. Trigger source is set to the BUS (set by the command TRIG:SOUR BUS), otherwise an error occurs, and the command is ignored.

2. Analyzer must be in the trigger waiting state, otherwise (the analyzer is in the measurement state or in the hold state) an error occurs, and the command is ignored.

The command is completed immediately after the generation of the trigger signal (does not wait the end of a sweep).

no query

Related Commands

TRIG:SOUR BUS

INIT:CONT

INIT

Equivalent Softkeys

None

Equivalent COM Command

SCPI.TRIGger.SEQuence.IMMediate

Syntax

app.SCPI.TRIGger.SEQuence.IMMediate

Type

Method

Back to TRIGger

Back to Command Finder

Back to Command Finder (From User Interface)

Rev.: 24.1