Please enable JavaScript to view this site.

 Network Analyzers using RVNA and RNVNA software

SCPI Command

INITiate<Ch>[:IMMediate]

Description

Sets trigger initiation mode to single. The Analyzer puts into a single trigger waiting state.

Channels should be in the hold state, otherwise an error occurs (error code 213), and the command is ignored. Channels goes into Hold as a result of the command INIT:CONT OFF.

Upon receipt of a trigger from the selected source, the sweep starts in turn for the all channels. On completion of the sweep, all channels goes to the Hold state.

The command is completed before the end of the sweep.

no query

Target

Channel <Ch>,

<Ch>={[1]|2|3|4}

<Ch>={[1]…|16} (in N-port mode only)

Related Commands

TRIG:SOUR

Equivalent Softkeys

Trigger > Trigger Mode > Single


Equivalent COM Command

SCPI.INITiate(Ch).IMMediate

Syntax

app.SCPI.INITiate(Ch).IMMediate

Type

Method


 

Back to INITiate

Back to Command Finder

Back to Command Finder (From User Interface)

 

Rev.:  24.1