SCPI Command
SENSe<Ch>:FREQuency:SPAN <frequency>
SENSe<Ch>:FREQuency:SPAN?
Description
Sets or reads out the stimulus span value of the sweep range for linear or logarithmic sweep type. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
Parameter
<frequency> the stimulus span value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The maximum frequency span of the Analyzer
Equivalent Softkeys
Stimulus > Span
Equivalent COM Command
SCPI.SENSe(Ch).FREQuency.SPAN
Syntax
Value = app.SCPI.SENSe(Ch).FREQuency.SPAN
app.SCPI.SENSe(Ch).FREQuency.SPAN = 2E9
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1