SCPI Command
SENSe<Ch>:CORRection:STATe {OFF|ON|0|1}
SENSe<Ch>:CORRection:STATe?
Description
Turns the S-parameter error correction ON/OFF. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Calibration > Correction
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.STATe
Syntax
Status = app.SCPI.SENSe(Ch).CORRection.STATe
app.SCPI.SENSe(Ch).CORRection.STATe = True
Type
Boolean (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1