SCPI Command
SENSe<Ch>:CORRection:EXTension:PORT<Pt>:LOSS{[1]|2} <loss>
SENSe<Ch>:CORRection:EXTension:PORT<Pt>:LOSS{[1]|2}?
Description
Sets or reads out the values of loss 1 and loss 2 for the port extension function. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Pt>=1
<Pt>={[1]…|16} (in N-port mode only)
Parameter
<loss> the loss value from –200 to 200
Unit
dB (decibel)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Calibration > Port Extension > {Loss 1 Value | Loss 2 Value}
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).LOSS(Ls)
Syntax
Value = app.SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).LOSS(Ls)
app.SCPI.SENSe(Ch).CORRection.EXTension.PORT(Pt).LOSS(Ls) = 10
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
