SCPI Command
SENSe<Ch>:CORRection:EXTension:AUTO:SAVE
Performs calculations after SHORT and OPEN measurements and sets port extension parameters. |
---|
command |
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]|2|...16} (in N-port mode only)
Calibration > Port Extensions > Auto Port Extension > Apply
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.AUTO.SAVE
app.SCPI.SENSe(Ch).CORRection.EXTension.AUTO.SAVE
Method
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)