SCPI Command
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:LOSS <loss>
SENSe<Ch>:CORRection:COLLect:CKIT:STAN<Std>:LOSS?
Description
Sets or reads out the offset loss value for the calibration standard. |
|---|
command/query |
Target
Standard <Std> of the calibration kit specified for channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
<Std>={[1]|2|...K}, where K — the number of the standards in the calibration kit
Parameter
<loss> the offset loss value from –1E18 to 1E18
Unit
Ω/s (Ohm/second)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Calibration Kit > Edit Cal Kit > Offset Loss
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).LABel
Syntax
Lab = app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).LABel
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.STAN(Std).LABel = "Open"
Type
String (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
