SCPI Command
SENSe<Ch>:CORRection:RECeiver<Pt>:COLLect:ACQuire <srcport>
Executes receiver calibration of both the test receiver and the reference receiver of the specified port <Pt>.The port number <srcport> is used as the source port for both receivers. Note: Don't use this command if the test receiver and reference receiver require a different source port number. |
---|
no query |
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2}
<srcport> |
The number of the source port from 1 to 2 |
Calibration > Receiver Calibration > Calibrate Both
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)