SCPI Command
SENSe<Ch>:CORRection:COEFficient:METHod[:RESPonse]:THRU <rcvport>, <srcport>
Description
Selects the ports and sets the response calibration (Thru) type when the written calibration coefficients are made effective by the SENS:CORR:COEF:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<rcvport> |
The number of the receiver port from 1 to 2 |
<srcport> |
The number of the source port from 1 to 2 |
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
Equivalent Softkeys
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3