SCPI Command
AFR:SYSTem:STEP<St>:THRU:REFOFFSet:SHORt {OFF|ON|0|1}
Description
Sets reflection measurements at the <Step> measurement step to the Short state. It is used for automatic determination of the calibration plane offset values. 2xThrough method. To make measurements, use the AFR:CALC:STEP<Step>:THRU:REFOFFS:SHOR command. |
|---|
no query |
Target
Measurement step <Step>,
<Step> = {1|2|...}
Parameter
{ON|1} |
ON |
{OFF|0} |
OFF |
Related Commands
AFR:CALCulate:STEP<Step>:THRU:REFOFFSet:SHORt
Related Controls of User Interface
Fixture measurement > Step <Step> of N > 2xThrough method > Apply fixture F1/F2 Aux calibration plane offset using reflects > Short
F1 - name of the left fixture,
F2 - name of the right fixture,
N - maximum number of steps.
Rev.: 22.2.1