SCPI Command
AFR:SYSTem:FIXTure:CONNECTion:DUT:DIFFerent {OFF|ON|0|1}
AFR:SYSTem:FIXTure:CONNECTion:DUT:DIFFerent?
Description
|
Sets or reads out the CAL ≠ DUT toggle switch state. The plug-in can use the CAL ≠ DUT mode if the DUT is installed in a fixture or is structurally implemented in a fixture where there is no possibility of removal. When the mode is turned on, an additional measurement step of the fixture along with DUT appears. The CAL ≠ DUT mode is available only when the time gating method is selected. Note. Corresponds to the toggle switch CAL ≠ DUT (see Fixture connection). |
|---|
|
command/query |
Parameter
|
{ON|1} |
ON |
|
{OFF|0} |
OFF |
Query Response
{0|1}
Related Elements of User Interface
Fixture connection > CAL ≠ DUT
