The rear view of the Analyzers is represented in the figure below.
Parts of Rear Panel
The power supply receptacle is intended for an external DC power supply voltage from 9 to 15 V; alternatively, the power supply can be powered by a battery, including a vehicle battery, through an appropriate vehicle power cable. The DC connection requires a 3.5x1.35 mm plug with positive center conductor. |
This connector allows to connect an external trigger source. Connector type is BNC female. For input and signal parameters, see instrument specification. |
External reference frequency is 10 MHz, input level is 2 dBm ± 3 dB, input impedance 50 Ω. Output reference signal level is 3 dBm ± 2 dB into 50 Ω impedance. Connector type is BNC female. |
The USB port is intended for connection to an external PC. |
To avoid electric shock, use the this terminal for grounding. The Ground terminal allows to connect directly the body of the Analyzer to the test station ground in order to ensure electrical safety. |
A Kensington lock (K-Slot) is part of an anti-theft system. |