SCPI Command
SENSe<Ch>:OFFSet:PORT<Pt>[:FREQuency]:DIVisor <numeric>
SENSe<Ch>:OFFSet:PORT<Pt>[:FREQuency]:DIVisor?
Description
Sets or reads out the basic frequency range divisor of port <Pt> when the frequency offset feature is ON. The offset type is always "PORT". |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...9}
<Pt>={[1]|2}
Parameter
<numeric> divisor from 1 to 1000
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1
Related Commands
Equivalent Softkeys
Stimulus > Freq. Offset > Port n > Divider
Equivalent COM Command
SCPI.SENSe(Ch).OFFSet.PORT(Pt).FREQuency.DIVisor
Syntax
Value = app.SCPI.SENSe(Ch).OFFset.PORT(Pt).FREQuency.DIVisor
app.SCPI.SENSe(Ch).OFFset.PORT(Pt).FREQuency.DIVisor = 2
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
