SCPI Command
SENSe<Ch>:CORRection:EXTension:AUTO:SAVE
Performs calculations after SHORT and OPEN measurements and sets port extension parameters. The measurements are performed by command SENS:CORR:EXT:AUTO:MEAS. When two consecutive measurements of SHORT and OPEN are performed the results of these measurements are averaged. |
---|
command/query |
Channel <Ch>,
<Ch>={[1]|2|...9}
Calibration > Port Extensions > Auto Port Extension > Apply
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.AUTO.SAVE
app.SCPI.SENSe(Ch).CORRection.EXTension.AUTO.SAVE
Method
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)