SCPI Command
SENSe<Ch>:CORRection:EXTension:AUTO:DCOFfset {OFF|ON|0|1}
SENSe<Ch>:CORRection:EXTension:AUTO:DCOFfset?
Description
Turns the usage of "Loss at DC" value for the results of the auto port extension function ON/OFF. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
{ON|1} |
"Loss at DC" value is used |
{OFF|0} |
"Loss at DC" value is not used |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Calibration > Port Extension > Auto Port Extension > Adjust Mismatch {ON/OFF}
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.EXTension.AUTO.DCOFfset
Syntax
Status = app.SCPI.SENSe(Ch).CORRection.EXTension.AUTO.DCOFfset = 1
Type
Boolean (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1