SCPI Command
SENSe:CORRection:COLLect:ECAL:PATH <numeric1>,<numeric2>
SENSe:CORRection:COLLect:ECAL:PATH? <numeric1>
Description
Sets or reads out the AutoCal module port number which is connected to a specified port of the Network Analyzer. |
|---|
command/query |
Target
AutoCal Module
Parameter
<numeric1> |
Network Analyzer Port Number |
<numeric2> |
AutoCal Module Port Number: |
|
1- Port A of AutoCal Module |
|
2- Port B of AutoCal Module |
|
3- Port C of AutoCal Module |
|
4- Port D of AutoCal Module |
Query Response
<numeric>
Equivalent Softkeys
Calibration > AutoCal > Orientation > Port 1 –> {Port A | Port B | Port C | Port D}
Calibration > AutoCal > Orientation > Port 2 –> {Port A | Port B | Port C | Port D}
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.ECAL.PATH(Pt)
Syntax
Value = app.SCPI.SENSe(Ch).CORRection.COLLect.ECAL.PATH(Pt)
app.SCPI.SENSe(Ch).CORRection.COLLect.ECAL.PATH(Pt) = 2
Type
Long (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
