SCPI Command
SENSe<Ch>:CORRection:COEFficient:METHod:ERESponse <rcvport>,<srcport>
Description
Selects the ports and sets the one-path two-port calibration type when the written calibration coefficients are made effective by the SENS:CORR:COEF:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<rcvport> |
The number of the receiver port is always 2 |
<srcport> |
The number of the source port is always 1 |
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COEFficient.METHod.ERESponse
Syntax
Ports = Array(2, 1)
app.SCPI.SENSe(Ch).CORRection.COEFficient.METHod.ERESponse = Ports
Type
Variant (array of long) (write only)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1