SCPI Command
SENSe<Ch>:CORRection:COEFficient[:DATA] <char>,<rcvport>,<srcport>,<numeric list>
SENSe<Ch>:CORRection:COEFficient[:DATA]? <char>,<rcvport>,<srcport>
Description
Writes or reads out the calibration coefficient data array. The array size is 2N, where N is the number of measurement points. For the n-th point, where n from 1 to N: <numeric 2n–1> real part of the calibration coefficients <numeric 2n> imaginary part of the calibration coefficients Note: The written calibration coefficients become effective only after the SENS:CORR:COEF:SAVE command is executed. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...9}
Parameter
<char> specifies the Error term:
ER |
Reflection tracking |
ED |
Directivity |
ES |
Source match |
ET |
Transmission tracking |
EX |
Isolation |
EL |
Load match |
<rcvport> the number of the receiver port from 1 to 2
<srcport> the number of the source port = 1
<numeric list> the calibration coefficient array
When ES, ER, or ED is used, the numbers of the ports <rcvport> and <srcport> must be the same. When EL, ET, or EX is used, the numbers of the ports <rcvport> and <srcport> must be different.
Query Response
<numeric 1>, <numeric 2>, …<numeric 2N>
Related Commands
SENS:CORR:COEF:SAVE
Equivalent Softkeys
None
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COEFficient.DATA(Str, Pt_r, Pt_s)
Syntax
Data = app.SCPI.SENSe(Ch).CORRection.COEFficient. DATA(Str,Pt_r, Pt_s)
app.SCPI.SENSe(Ch).CORRection.COEFficient.DATA(Str, Pt_r, Pt_s) = Data
Type
Variant (array of Double) (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
