The following section describes the processes of saving and recalling:
•The set parameters of the Analyzer, calibration, measured, and memorized data are stored in the Analyzer status file and can be loaded repeatedly (See Analyzer States).
•The states of the channels are stored into the Analyzer’s inner memory. Up to 4 states can be stored while the Analyzer is running. When the Analyzer is powered off, the contents of the state memory are destroyed (See Channel States).
•Trace data in a *.CSV file (See Trace Data CSV Files).
•DUT S-parameters in a Touchstone file (See Trace Data Touchstone Files).
Rev.: 24.2