The section describes how to set the various measurement conditions of the Analyzer. To perform measurements, do the following according to each measurement task:
•Set the required number of the channels, and their parameters. Set the required number of traces and their parameters for each channel. For a detailed description, see Channel and Trace Setting.
•Set the stimulus signal parameters for each channel. For a detailed description, see Stimulus Settings.
•Assign the measured parameters, display format and scale for each trace. For a detailed description, see Measurement Parameters Settings, Format Setting, Scale Settings.
•If necessary, set the related trigger settings to synchronize measurements with any events. For a detailed description, see Trigger Settings.
•Set the optimization parameters to improve the signal to noise ratio. For a detailed description, see Measurement Optimization.
This section also describes how to quickly set the parameters of the analyzer using a mouse. For a detailed description, see Quick Setting Using a Mouse.