SCPI Command
SENSe:SWEep:PULSe:MODulator:DELay <numeric>
SENSe:SWEep:PULSe:MODulator:DELay?
Description
Sets or reads out the value of the modulation pulse delay for the synchronous pulse modes (Point-in-pulse and Pulse profile modes). The delay is counted from the pulse trigger (See the SENS:SWE:PULS:TRIG:SOUR command). Note: S5180B model only. |
|---|
command/query |
Target
Analyzer
Parameter
<numeric> the modulation pulse delay value.
Unit
sec (seconds)
Resolution
100 ns
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse Delay
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)
Rev.: 24.1