SCPI Command
SENSe:SWEep:PULSe:MODulator:ENABle {OFF|ON|0|1}
SENSe:SWEep:PULSe:MODulator:ENABle?
Description
Turns the internal modulator in asynchronous mode ON/OFF. In synchronous mode, the modulator is always on. There is a continuous stimulus at the analyzer port if the modulator is turned off. Note: S5180B model only. |
|---|
command/query |
Target
Analyzer
Parameter
The analyzer port transmits a stimulus:
{ON|1} |
modulated by an internal modulator |
{OFF|0} |
continuous |
Query Response
{0|1}
Preset Value
1
Equivalent Softkeys
Stimulus > Pulse Meas > Internal Modulator
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)
Rev.: 24.1