SCPI Command
SENSe<Ch>:SWEep:PULSe:MODE {POINt|PROFile|ASYNchronous}
SENSe<Ch>:SWEep:PULSe:MODE?
Description
Selects or reads out the pulse mode for the specified channel. The Point-in-pulse and Pulse profile modes can coexist in various channels. The Asynchronous mode cannot coexist with the Point-in-pulse and Pulse Profile modes and switches all channels to the Asynchronous mode. Note: S5180B model only. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
POINt |
"Point-in-Pulse" mode |
PROFile |
"Pulse Profile" mode |
ASYNchronous |
"Asynchronous" mode |
Query Response
{POINt|PROFile|ASYNchronous}
Preset Value
POINt
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse Mode {Point-in-Pulse | Pulse Profile | Asynchronous}
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)
Rev.: 24.1