SCPI Command
SENSe:PULS1:OUTPut {OFF|ON|STD}
SENSe:PULS1:OUTPut?
Description
Sets or reads out the designation of the "Pulse 1 Out" connector. If this connector is used for "Ready for Pulse" signal then the SENS:SWE:PULS:TRIG:READy command has priority. Note: S5180B model only. |
|---|
command/query |
Target
Analyzer
Parameter
<char> Choose from:
OFF |
"Pulse 1 Out" connector is not used. |
ON |
"Pulse 1 Out" connector outputs the internal generator "Pulse 1" signal. |
STD |
"Pulse 1 Out" connector operates according to the trigger settings for standard measurements. |
Query Response
{OFF|ON|STD}
Preset Value
OFF
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse 1 Out > {OFF | Pulse 1 Out | Trigger Output}
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)
Rev.: 24.1