SCPI Command
SENSe:PULS1:DELay <numeric>
SENSe:PULS1:DELay?
Description
Sets or reads out the pulse delay of the internal generator "Pulse1" from the pulse trigger (See the SENS:SWE:PULS:TRIG:SOUR command). The "Pulse1" signal can be routed to the "Pulse 1 Out" connector. Note: S5180B model only. |
|---|
command/query |
Target
Analyzer
Parameter
<numeric> the internal generator "Pulse 1" pulse delay value.
Unit
sec (seconds)
Resolution
100 ns
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Pulse Meas > Pulse 1 Out > Pulse 1 Delay
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)
Rev.: 24.1