SCPI Command
SENSe<Ch>:BANDwidth[:RESolution] <frequency>
SENSe<Ch>:BANDwidth[:RESolution]?
Description
Sets or reads out the IF bandwidth. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|3|4}
<Ch>={[1]…|16} (in N-port mode only)
Parameter
<frequency> the IF bandwidth value
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10 kHz
Resolution
In steps of 10, 30, 100, 300, 1000, 3000, 10000, 30000
Related Commands
SENS:BWID — similar command
Equivalent Softkeys
Average > IFBW
Equivalent COM Command
SCPI.SENSe(Ch).BANDwidth.RESolution
Syntax
Value = app.SCPI.SENSe(Ch).BANDwidth.RESolution
app.SCPI.SENSe(Ch).BANDwidth.RESolution = 100
Type
Double (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 24.1