Network Analyzers using PXI software

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Programming > Command Reference > TRIGger

TRIG:SOUR

Scroll Contact Us Home Prev Top Next More

SCPI Command

TRIGger[:SEQuence]:SOURce <char>

TRIGger[:SEQuence]:SOURce?

Description

Selects the trigger source (See options below). If the continuous trigger initiation mode is enabled with the command INIT:CONT ON, the INTernal choice leads to continuous sweep. The choice of another option switches the analyzer to the trigger waiting state from the corresponding source. If the continuous trigger initiation mode is disabled with the command INIT:CONT OFF, the reaction to INIT command is different. Selecting INTernal leads to a single sweep in response to the command INIT, selection another option puts the analyzer in a single trigger waiting state in response to the INIT command.
command/query

Selects the trigger source (See options below).

If the continuous trigger initiation mode is enabled with the command INIT:CONT ON, the INTernal choice leads to continuous sweep. The choice of another option switches the analyzer to the trigger waiting state from the corresponding source.

If the continuous trigger initiation mode is disabled with the command INIT:CONT OFF, the reaction to INIT command is different. Selecting INTernal leads to a single sweep in response to the command INIT, selection another option puts the analyzer in a single trigger waiting state in response to the INIT command.

command/query