Please enable JavaScript to view this site.

 Network Analyzers using PXI software

SCPI Command

INITiate<Ch>:CONTinuous {OFF|ON|0|1}

INITiate<Ch>:CONTinuous?

Description

Turns the continuous trigger initiation mode for the channel <Ch> ON/OFF.

When the continuous initiation mode is turned ON:

If the Internal trigger source is selected by the command TRIG:SOUR INT, then the channel continuously sweeps.

If the trigger source selected is one other than the internal, then the channel goes to the trigger waiting state. Upon receipt of a trigger from the selected source, the sweep starts for the channels awaiting trigger. On completion of the sweep the channel goes to the trigger waiting state.

When the continuous trigger initiation mode is turned OFF the channel is in the Hold state, to initiate a sweep use the INIT command.

command /query

Target

Channel <Ch>,

<Ch>={[1]|2|...16}

Parameter

Specifies the continuous trigger initiation mode:

{ON|1}

ON

{OFF|0}

OFF

Query Response

{0|1}

Preset Value

1

Related Commands

TRIG:SOUR

INIT

Equivalent Softkeys

Stimulus > Trigger > Continuous

Stimulus > Trigger > Hold

Back to INITiate

Back to Command Finder

Back to Command Finder (From User Interface)

 

Rev.:  22.3