SCPI Command
SENSe<Ch>:CORRection:RECeiver<Pt>:OFFSET:AMPLitude <numeric>
SENSe<Ch>:CORRection:RECeiver<Pt>:OFFSET:AMPLitude?
Description
Sets or reads out the power offset value when the Receiver Calibration is performed. Receiver calibration is done at the condition of <source power> + <power offset>. |
|---|
command/query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2}
Parameter
<numeric> the power offset value when the Receiver Calibration is performed from -100 to 100.
Unit
dBm (decibels above 1 milliwatt)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0.0
Equivalent Softkeys
Calibration > Receiver Calibration > Power Offset
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3