SCPI Command
SENSe<Ch>:CORRection:COLLect:ECAL:SOLT2 <port1>,<port2>
Description
Executes full two-port calibration between the specified 2 ports of the specified channel using the AutoCal module. |
|---|
command only |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port1> |
Port Number |
<port2> |
Port Number |
Equivalent Softkeys
Calibration > AutoCal > 2-Port AutoCal
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.3