SCPI Command
SENSe<Ch>:FREQuency:STOP <frequency>
SENSe<Ch>:FREQuency:STOP?
Description
Sets or reads out the stimulus stop value of the sweep range for linear or logarithmic sweep type. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the stimulus stop value within the frequency limits of the analyzer.
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The maximum frequency limit of the analyzer.
Back to SENSe
Back to Command Finder
Rev.: 26.00