SCPI Command
SENSe<Ch>:CORRection:COLLect:METHod:ERESponse <rcvport>,<srcport>
Description
Selects the ports and sets the one path 2–port calibration type for the calculation of the calibration coefficients on completion of the calibration executed by the SENS:CORR:COLL:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<rcvport> |
The number of the receiver port from 1 to 2 |
<srcport> |
The number of the source port from 1 to 2 |
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
Back to SENSe
Back to Command Finder
Rev.: 26.00