SCPI Command
SYSTem:FREQuency:EXTender:PORT<Pt>:CONNect?
Description
Reads out whether the frequency extender is connected to the port number <Pt>. The actual state is read out when the FET-1854 is configured. Always reads 1 when other type of frequency extender is configured. |
|---|
query only |
Target
Port <Pt>,
<Pt>={[1]|2|3|4}
Query Response
1 |
Connected |
0 |
Not connected |
Equivalent Softkeys
None
Equivalent COM Command
None
Back to SYSTem
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4