SCPI Command
SENSe<Ch>:VOLTage{[1]|2}:DC:RANGe:UPPer <numeric>
SENSe<Ch>:VOLTage{[1]|2}:DC:RANGe:UPPer?
Description
Sets or reads out the DC voltage range at the connector AUX1 or AUX2. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the DC voltage range 10V or 1V
Unit
V (Volt)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
10
Equivalent Softkeys
Measurement > DC Voltage > Range
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4