SCPI Command
SENSe<Ch>:SWEep:REVerse[:STATe] {OFF|ON|0|1}
SENSe<Ch>:SWEep:REVerse[:STATe]?
Description
Sets or reads out the ON/OFF status of the reverse sweep function. In normal sweep mode, the start frequency is less than the stop frequency. If reverse sweep mode is enabled, the stop frequency is less than the start frequency. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
{ON|1} |
Reverse sweep mode |
{OFF|0} |
Normal sweep mode |
Query Response
{0|1}
Preset Value
0
Equivalent Softkeys
Stimulus > Reverse Sweep {ON/OFF}
Equivalent COM Command
SCPI.SENSe(Ch).SWEep.REVerse.STATe
Syntax
Status = app.SCPI.SENSe(Ch).SWEep.REVerse.STATe
app.SCPI.SENSe(Ch).SWep.REVerse.STATe = True
Type
Boolean (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4