SCPI Command
SENSe<Ch>:OFFSet:ADJust:PORTs <numeric list>
SENSe<Ch>:OFFSet:ADJust:PORTs?
Description
Sets or reads out the list of port numbers to which frequency adjust is applied when the frequency offset adjust function is active. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric list> list of port numbers to which frequency adjust is applied. The length of list is from 1 to 3. The port numbers are separated by comma.
Query Response
<numeric list>
Equivalent Softkeys
Stimulus > Frequency Offset > Offset Adjust > Adjusted Port(s) > Port n
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4