SCPI Command
SENSe<Ch>:OFFSet:ADJust:CONTinuous:PERiod <numeric>
SENSe<Ch>:OFFSet:ADJust:CONTinuous:PERiod?
Description
Sets or reads out the adjust period in seconds when the frequency offset adjust function is active. If the adjust period is set to the value other than zero then the adjust procedure is automatically repeated. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> period of the automatic adjust procedure from 5 to 10000 seconds. Zero value disables the automatic adjust procedure.
Unit
sec (seconds)
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Frequency Offset > Offset Adjust > Auto Adjust Period
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4