SCPI Command
SENSe<Ch>:CORRection:RECeiver<Pt>:COLLect:RCHannel:ACQuire <srcport>
Description
Executes receiver calibration of the reference receiver of the specified port <Pt>. The test receiver calibration uses port number <srcport> as the source port. Note: The source port number must be the same as the receiver port number, except for VNAs with direct access to the receiver. Note: The command starts the measurement of the calibration data immediately regardless the trigger settings. The command blocks the execution of the subsequent commands until the completion of the measurement. |
|---|
no query |
Target
Port <Pt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Pt>={[1]|2|3|4}
<Pt>={[1]|2|3|4}
Parameter
<srcport> |
The number of the source port from 1 to 4 |
Equivalent Softkeys
Calibration > Receiver Calibration > Calibrate Reference Receiver
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.RECeiver(Pt).COLLect.RCHannel.ACQuire
Syntax
app.SCPI.SENSe(Ch).CORRection.RECeiver(Pt).COLLect.RCHannel.ACQuire
Type
Method
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
