SCPI Command
SENSe<Ch>:CORRection:EXTension:AUTO:STARt <frequency>
SENSe<Ch>:CORRection:EXTension:AUTO:STARt?
Description
Sets or reads out the start value of the user span of the auto port extension function. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<frequency> the user span start
Unit
Hz (Hertz)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
The Analyzer's lowest frequency.
Related Commands
Equivalent Softkeys
Calibration > Port Extension > Auto Port Extension > User Span Start
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
Rev.: 22.4