SCPI Command
SENSe<Ch>:CORRection:COLLect:METHod:SOLT3 <port1>,<port2>,<port3>
Description
Selects the ports and sets the full three-port calibration type for the calculation of the calibration coefficients on completion of the calibration executed by the SENS:CORR:COLL:SAVE command. |
|---|
no query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port1> |
The first port number from 1 to 4 |
<port2> |
The second port number from 1 to 4 |
<port3> |
The third port number from 1 to 4 |
Out of Range
If the same port numbers are specified, an error occurs.
Related Commands
Equivalent Softkeys
Calibration > Calibrate > 3–Port SOLT Cal > Select Ports {x-y-z}
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.METHod.SOLT3
Syntax
app.SCPI.SENSe(Ch).CORRection.COLLect.METHod.SOLT3 = Array(1, 2, 3)
Type
Variant (array of long)(write only)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
