SCPI Command
SENSe:CORRection:COLLect:CKIT:ORDer:THRU <port1>,<port2>,<numeric>
SENSe:CORRection:COLLect:CKIT:ORDer:THRU? <port1>,<port2>
Description
Sets or reads out the number of the calibration standard in the calibration kit that assigned to the THRU class for the measurement between the <port1> and <port2> ports. |
|---|
command/query |
Target
Selected calibration kit
Parameter
<port1> |
The number of the receiver port from 1 to 4 |
<port2> |
The number of the source port from 1 to 4 |
<numeric> |
The number of the calibration standard |
Out of Range
If the specified standard number is greater than the number of standards in the kit, an error occurs. If the specified standard number is not the thru standard number, an error occurs.
Query Response
<numeric>
Equivalent Softkeys
Calibration > Cal Kit > Specify CLSs > Thru Port x-y (Row)
Equivalent COM Command
SCPI.SENSe(Ch).CORRection.COLLect.CKIT.ORDer.THRU(Pt_m, Pt_n)
Syntax
Num = app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.ORDer.THRU (1, 2)
app.SCPI.SENSe(Ch).CORRection.COLLect.CKIT.ORDer.THRU (1, 2) = 1
Type
Long (read/write)
Back to SENSe
Back to Command Finder
Back to Command Finder (From User Interface)
