SCPI Command
CALCulate<Ch>:PARameter<Tr>:DEFine <char>
CALCulate<Ch>:PARameter<Tr>:DEFine?
Description
Selects the measurement parameter of the trace. |
|---|
command/query |
Target
Trace <Tr> of channel <Ch>,
<Tr>={[1]|2|...16}
<Ch>={[1]|2|...16}
Parameter
<char> Specifies parameter:
S11, S12, S13, S14, S21, S22, S23, S24, S31, S32, S33, S34, S41, S42, S43, S44 |
S-parameter |
T1, T2, T3, T4 |
Test receiver |
R1, R2, R3, R4 |
Reference receiver |
AUX1, AUX2 or V1, V2 |
DC Voltage |
Query Response
{S11|S12|S13|S14|S21|S22|S23|S24|S31|S32|S33|S34|S41|S42|S43|S44|R1(n)|R2(n)|R3(n)|R4(n)|A(n)|B(n)|C(n)|D(n)|V1(n)|V2(n)},
Where n is the stimulus port number
Preset Value
Depends on the trace number.
Equivalent Softkeys
Measurement > S-Parameter > S11 | S12 | … S44
Measurement > Test Receiver > T1(1) | T1(2) | … T4(4)
Measurement > Reference Receiver > R1(1) | R1(2) | … R4(4)
Measurement > DC Voltage > {AUX In1|AUX In2}
Equivalent COM Command
SCPI.CALCulate(Ch).PARameter(Tr).DEFine
Syntax
StrMeas = app.SCPI.CALCulate(Ch).PARameter(Tr).DEFine
app.SCPI.CALCulate(Ch).PARameter(Tr).DEFine = "S11"
Type
String (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
