SCPI Command
CALCulate<Ch>:FSIMulator:BALun:DZConversion:BPORt<Bpt>:Z0[:R] <numeric>
CALCulate<Ch>:FSIMulator:BALun:DZConversion:BPORt<Bpt>:Z0[:R]?
Description
Sets or reads out the impedance value for the differential impedance conversion function of the balanced port. The impedance is real. The default impedance value equals to 100 Ω. |
|---|
command/query |
Target
Balanced Port <Bpt> of channel <Ch>,
<Ch>={[1]|2|...16}
<Bpt>={[1]|2}, 1 or 2 for the Bal-Bal topology, always 1 for the SE-Bal, SE-SE-Bal and Bal topology.
Parameter
<numeric> the new value of the differential impedance of the balanced port from 1 mΩ to 10 MΩ.
Unit
Ω (Ohm)
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
100 Ω
Equivalent Softkeys
Analysis > Fixture Simulator > Diff ZConversion > Bal Port n
Equivalent COM Command
SCPI.CALCulate(Ch).FSIMulator.BALun.DZConversion.BPORt(Bpt).Z0.R
Syntax
Status = app.SCPI.CALCulate(Ch).FSIMulator.BALun.DZConversion.BPORt(Bpt).Z0.R
app.SCPI.CALCulate(Ch).FSIMulator.BALun.DZConversion.BPORt(Bpt).Z0.R = 20
Type
Double (read/write)
Back to CALCulate
Back to Command Finder
Back to Command Finder (From User Interface)
