Network Analyzers using S2VNA software

Reads a single sweep data array from the FIFO buffer. According to the FIFO method, the oldest stored sweep is read first. The read sweep is removed from the FIFO buffer, and memory is freed for writing the next sweep. The array contains data for all open traces in real and imaginary part format, regardless of the format set for each trace. The data includes all trace processing stages up to the formatting stage (See Internal Data Processing and Internal Data Arrays). The array size is:

Size = 2*N*M,

where:

N -– number of measurement points

M -– number of traces

The format of the array returned by this command:

Note: The command supports transfer of binary blocks (See FORMat).

Note: Cobalt Series, S5180B, and S5243 models only.