SCPI Command
SENSe:SWEep:PULSe:MODulator:WIDTh <numeric>
SENSe:SWEep:PULSe:MODulator:WIDTh?
Sets or reads out the value of the modulation pulse width. In the synchronous modes (Point-in-pulse and Pulse Profile modes) this value represents the pulse width regardless to the pulse trigger source. In Asynchronous mode this value represents the pulse width for the internal asynchronous pulse source only. Warning: The pulse mode must be set with the SENS:SWE:PULS:MODE command before this command. Note: S5180B model only. |
---|
command/query |
Analyzer
<numeric> the modulation pulse width value.
sec (seconds)
Resolution
100 ns
<numeric>
100μs
Stimulus > Pulse Meas > Pulse Width
Equivalent COM Command
None
Back to Pulse Measurement S5180B
Back to Command Finder (From User Interface)