SCPI Command
SENSe<ch>:PLS2:PTRG:EDGE {POS|NEG}
SENSe<ch>:PLS2:PTRG:EDGE?
Sets the active edge of the external pulse trigger. Pulse trigger source must be set "external". Note: S5243 model only. |
---|
command/query |
Channel <Ch> = {[1]|2| ... 16}
<char> active edge of the external signal:
POS |
Positive (rising edge) |
NEG |
Negative (falling edge) |
POS
Stimulus > Pulse Meas > Pulse Trigger > Edge > {Positive | Negative}
Equivalent COM Command
None
Back to Pulse Measurement S5243
Back to Command Finder (From User Interface)