SCPI Command
SENSe<Ch>:OFFSet:ADJust:VALue <numeric>
SENSe<Ch>:OFFSet:ADJust:VALue?
Description
Sets or reads out the value of the offset adjust. The value is added to the frequency offset of the port set by the SENS:OFFS:ADJ:PORT command. The value is automatically adjusted when the SENS:OFFS:ADJ:EXEC command is executed. |
|---|
command/query |
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> adjust value from -500 kHz to +500 kHz.
Unit
Hz (Hertz)
Query Response
<numeric>
Equivalent Softkeys
Stimulus > Frequency Offset > Offset Adjust > Adjust Value
Equivalent COM Command
None
Back to SENSe
Back to Command Finder
Rev.: 24.2