SCPI Command
SENSe<Ch>:OFFSet:ADJust:PORTs <numeric >
SENSe<Ch>:OFFSet:ADJust:PORTs?
Sets or reads out the port number to which offset adjust is applied when the frequency offset adjust function is active. |
---|
command/query |
Channel <Ch>,
<Ch>={[1]|2|...16}
<numeric> port number to which frequency adjust is applied.
<numeric>
Stimulus > Frequency Offset > Offset Adjust > Adjusted Port
Equivalent COM Command
None
Back to SENSe
Back to Command Finder